Project Description
UPVC VERTICAL HINGED WINDOW SYSTEM
With advanced technology,energy conservation and environment protection casting,extrusion,anodizing,electrophoresis ,powder coating ,wooden grain transfer and thermal break bridge system production lines to meet customers needs
| UPVC-V-65 | UPVC-V-60-1 |
| UPVC-V-60-2 | UPVC-V-60-3 |
Techonlogy
GENERAL CHEMICAL COMPOSITION OF ALLOY
| ALLOY | Si(%) | Fe(%) | Cu(%) | Mu(%) | Mg(%) | Gr(%) | Zn(%) | Ti(%) | Other(% each) | Other(% total) | Al(%) |
| 6063 | 0.20-0.60 | <=0.35 | <=0.10 | <=0.10 | 0.45-0.90 | <=0.10 | <=0.10 | <=0.10 | <=0.05 | <=0.15 | Remainder |
| 6063A | 0.30-0.60 | 0.15-0.35 | <=0.10 | <=0.15 | 0.60-0.90 | <=0.05 | <=0.15 | <=0.10 | <=0.05 | <=0.15 | Remainder |
| 6061 | 0.10-0.80 | <=0.70 | 0.15-0.40 | <=0.15 | 0.80-1.20 | 0.04-0.35 | <=0.25 | <=0.15 | <=0.05 | <=0.15 | Remainder |
MECHANICAL PROPERTIES OF SECTIONS UNDER ROOM TEMPERATURE
| ALLOY | STATE | THICKNESS
/MM |
TENSILE STRENGTH TEST | HARDNESS TEST | ||||
| TENSILE STRENGTH | NON-PROPORTIONAL STRETCHING STRESS | STRETCHING RATE | PATTERN THICKNESS | HV | HW | |||
| Rp 0.2/Mpa | % | MM | ||||||
| NO LESS THAN (>=) | ||||||||
| 6061 | T4 | ALL | 180 | 110 | 16 | – | – | – |
| T6 | ALL | 265 | 245 | 8 | – | – | – | |
| 6063 | T5 | ALL | 160 | 110 | 8 | 0.8 | 58 | 8 |
| T6 | ALL | 205 | 180 | 8 | – | – | – | |
| 6063A | T5 | <=10 | 200 | 160 | 5 | 0.8 | 65 | 10 |
| >10 | 190 | 150 | 5 | 0.8 | 65 | 10 | ||
| T6 | <=10 | 230 | 190 | 5 | – | – | – | |
| >10 | 220 | 180 | 4 | – | – | – | ||
SURFACE TREATMENT
| CLASS | MIN-AVERAGE FILM THICKNESS | MIN-PART FILM THICKNESS |
| AA10 | 10 | 8 |
| AA15 | 15 | 12 |
| AA20 | 20 | 16 |
| AA25 | 25 | 20 |
NOTE:THE ANODIZED OF GOODS IS GENERALLY SUPPLIED IN CLASS AA10,OR IS CONTROLLED ACCORDING TO CLIENT SREQUEST
ELEETROPHORESIS (PCR-DGGE)SURFACE TREATMENT
| CLASS | ANODIZED FILM | COATING | COMPOSITE FILM | |
| AVERAGE FILM THICKNESS(um) | PART FILM THICKNESS(um) | PART FILM THICKNESS(um) | PART FILM THICKNESS(um) | |
| A | 10 | >=8 | >=12 | >=21 |
| B | >=10 | >=8 | >=7 | >=16 |
NOTE:THE ANODIZED OF GOODS IS GENERALLY SUPPLIED IN CLASS B,OR IS CONTROLLED ACCORDING TO CLIENT SREQUEST
Window & Door Solution
